Chapter 3 Printer Driver

B

Back cover

By using [Paper] tab-[Back Cover], you can perform the setting to use a designated tray for printing the last page.

Select either [On] or [Off].

Default of Back Cover is [None].

When [On] is selected, select either [Blank] or [Printed].

When [Blank] is selected, nothing is printed on the back cover.

When [Printed] is selected, the last page is printed on a back cover.

The tray for the back cover is selected by using [Front/Back Cover]-[Paper Tray].

Back Cover [Off]

Back Cover

Back Cover

[On] [Blank]

[On] [Printed]

 

[Not indicated]

Back Cover can not be set in the following conditions:

When [B6R] is selected as a paper size,

When Alternate is set to [On],

When Duplex is set to [booklet], or

When Sort is set to [Group]

C

Capture printer port

When the device name and path are specified on the [Capture Printer Port] dialog shown by clicking [Details] tab-[Capture Printer Port] button, a network printer can be allocated as a virtual printer port.

In addition, when [Reconnect at Logon] of the [Capture Printer Port] dialog is selected, a virtual printer port is automatically reconnected at log-on.

IP-011 Printer Controller 3-9

Page 47
Image 47
Konica Minolta IP-011 manual Printer Driver Back cover, Capture printer port