Chapter 3 Printer Driver
In addition, when Staple is specified, you can not select Alternate.
You can not staple at two positions for the paper of B5R or smaller.
Stapling is performed in accordance with orientations as follows:
1- Left (portrait) | 1- Left (landscape) |
1- Right (portrait) |
2- Top (portrait) |
T
Timeout settings
By using [Detail]
The [Not selected] box is used to set the waiting time until a printer becomes available of printing in the unit of second when a computer starts outputting print data. If the waiting time exceeds this set value, a printer error is shown and the job is automatically cancelled.
The [Transmission retry] box is used to set the
waiting time until a printer a printer becomes available of printing in the unit of second when a computer fails to output once and outputs print data again. If the waiting time exceeds this set value, a printer error is shown and the job is automatically cancelled.
