Konica Minolta IP-011 manual Installation of the Printer Driver, Before Installation

Chapter 2 Setup

■Installation of the Printer Driver

●Before Installation

Models and Environment of Computers

The Printer Controller for Konica 7020 series, IP-011, can be used with most computers ranging from personal computers to workstations.

The IP-011 includes the printer driver for Windows95/98 and WindowsNT.

The printer driver can be installed to any models of computers as long as Windows95/98 and WindowsNT have been installed to them.

About Windows95/98 and WindowsNT

Since on Windows95/98 and WindowsNT, the ways to manage the user interface and the printer are different respectively, the ways to install the printer driver and the ways to print with the printer vary. Therefore, the Konica IP-011 includes the printer driver for each Windows.

Please keep the “User Software CD” on hand since it is required to install the printer driver.

In this manual, the ways to install the printer driver to each Windows are explained in “Installation to Windows95/98” and “Installation to WindowsNT4.0” separately. Please read the section of your Windows.

●Files to be Installed

When the printer driver is installed with the “User Software CD”, the following files are installed to your computer.

The files to be installed vary, depending on the ways to install. Select an appropriate way.

Installation to Windows95/98			Installation to WindowsNT
Setup. exe	Add Printer	Plug & Play	Setup. exe	Add Printer
(User Software CD)			(User Software CD)

Printer Driver for 95/98

Printer Driver for NT

Konica IP-011

Printer Tools

Konica IP-011 Help

Konica IP-011 Readme

Uninstaller

IP-011 Printer Controller 2-3