Konica Minolta manual 16 IP-011 Printer Controller

Chapter 2 Setup

[Print Quality] tab

[Smoothing]: Off, Type 1, Type 2 and Type 3

Specifies the smoothing type. This function is unavailable for US.

Type 1: processes suitable for oblique lines of general characters and pictures

Type 2: processes suitable for curves of general characters

Type 3: processes suitable for curves of decorated characters and fine characters

[Page Protection]: Auto and On

Specifies how to protect page data.

The page protection is a function to secure memories required to print complicated charac- ters or image documents in advance, and completely create one-page print data before actual printing starts.

This function secures printing of each page and avoids the memory overrun error.

Normally, set this setting to [Auto]. If any errors occur, try to set it to [On]. Setting it to [On] decreases the printing speed and requires more memories, but may reduce printing errors.

[Option] tab

[Finisher]: None, 2 Trays, 3 Trays and 4 Trays

Specifies the finisher of the copier option.

[Option Tray]: None, DB-209(2 Trays) and DB-409(1 Tray)

Specifies the Option Tray of the copier option.

2-16 IP-011 Printer Controller