Konica Minolta IP-011 manual Printer Driver Function List, COM1, COM2 File

Chapter 3 Printer Driver

■Printer Driver Function List

The following list summarizes functions (Setting items) which can be set by using the Printer Driver of the Konica 7020 series +IP-011 system.

Refer to “■ Description of Printer Driver Functions (in the alphabetic order)” (3-8 page) for setting items of each function.

Refer to “■ List of Combined Printer Driver Functions (in the alphabetic order)” (3-23 page) for combination of each function.

In addition, refer to “2 Setup” (2-1 page) for how to perform printer settings from applications, “4 Control Panel Setup” (4-1 page) for how to perform printer settings from the LCD panel and “5 Status Monitor and Control Panel” (5-1 page) for how to perform printer settings from the Printer Tools.

Classification	Setting Items	Set Value	Description	95/98	NT4.0
Port-	Time out setting	Not selected	This function is used to set
related		Transmission retry	timeout of the parallel port and
Matters
			resending time.
	Port settings	Spool MS-DOS	This function is used to set whether the
		print job.	MS-DOS print job is spooled or not and
		Check port state	whether the status of the LPTx: port is
		before printing.	checked before printing or not.
	Print to the follwing	COM1, COM2 FILE	This function is used to set
	port	and LPT1	the printing port.
	Capture a Printer port	Device Reconnect	This function is used to set the device
		at log-on	name and path of the printer at the
			time of printing by way of a network
			and whether reconnection is performed
			or not at the time of log-on.
	End capture	-	This function is used to unallocate
			the network paths of unnecessary
			network printers.
	Add Port	Network and other	This function is used to add a port.
	Delete port	-	This function is used to delete an
			unnecessary port.
Driver-	New driver	-	This function is used to add a driver.
related

Matters

Spooling- Spooling settings Spool print jobs so

related	program finishes
Matters
	pringing faster. Print
	directly to the printer.
	Enable bi-directional
	support for this printer.
	Disable bi-directional
	support for this printer.

This function is used to set spooling and bi-directional communication functions.

IP-011 Printer Controller 3-5