Konica Minolta IP-011 manual Print Quality, Timeout

Chapter 4 Control Panel Setup

●Print Quality

Select [1. Setting]-[3. Print Quality] on the Printer Setting screen to display the Print Quality Setup screen. Items of the Print Quality Setup screen are as follow:

[1. Smoothing]

Press [1] to display the Smoothing Setup screen. You can set to [Off], [Type 1], [Type 2] or [Type 3] on the Smoothing Setup screen. The factory default is [1. None].

[2. Page Protection]

Press [2] to display the Page Protection Setup screen. You can set to [Auto] or [On] on the Page Protection Setup screen. The factory default is [1. Auto].

●I/O Timeout

Select [1. Setting]-[4. I/O Timeout] on the Printer Setting screen to display the I/O Timeout Setup screen. The factory default is [5. 30].

Items of the I/O Timeout Setup screen are as follows:

[1. 5]

Press [1] to set the I/O Timeout value to 5 seconds.

[2. 10]

Press [2] to set the I/O Timeout value to 10 seconds.

[3. 15]

Press [3] to set the I/O Timeout value to 15 seconds.

[4. 20]

Press [4] to set the I/O Timeout value to 20 seconds.

[5. 30]

Press [5] to set the I/O Timeout value to 30 seconds.

[6. 60]

Press [6] to set the I/O Timeout value to 60 seconds.

[7. 120]

Press [7] to set the I/O Timeout value to 120 seconds.

[8. 180]

Press [8] to set the I/O Timeout value to 180 seconds.

[9. 240]

Press [9] to set the I/O Timeout value to 240 seconds.

[10. 300]

Press [10] to set the I/O Timeout value to 300 seconds.

4-12 IP-011 Printer Controller