Chapter 3 Printer Driver
■Description of Printer Driver Functions (in the alphabetic order)
Functions (setting items) which can be set with the Printer Driver are summarized in the alphabetic order. These settings can be set by using
●Alphabetic Order
A
About
When [Setup]
Add Port
When the port you would like to connect to is not shown on the list shown by clicking the [▼] button beside the [Details]
When the [Add Port] button is clicked, the [Add
Port] dialog is shown.
The following settings are performed on the [Add Port] dialog;
When [Network] is selected to set a path to a network printer, you can add a network printer to a port. When [Others] is selected to select the type of a port to be added, you can add the port selected from a list.
Alternate
When the following conditions are satisfied, you can perform settings of the alternate printing by using [Setup]
•When [None] is selected in the Finisher settings, or when the Finisher is not installed,
•When [A4], [Letter] or [B5] is selected in the paper settings,
•When the same size of paper for both
portrait and landscape is set to the copier, (e.g.: A4/A4R, and B5/B5R)
•When Front/Back Cover are not set and,
•When [Booklet] is not selected in the [Duplex].
When [On] is selected in the Alternate printing, every set of copies are output in a direction at
right angles to the previous set of copies. e.g.
1st copy
| 2nd copy | 3rd copy |
|
| |
|
| 2nd copy |
|
| 1st copy |
On |
| Off |
