Kyocera FS-1920 manual Writing Data, Write Data ?

Operating the Storage Device

Writing Data

You can write data to a CompactFlash card, the Microdrive, or the RAM disk using the operator panel. When writing data to the storage device, a name is automatically assigned to the data. The CompactFlash card or the Microdrive or the RAM disk must be formatted. Otherwise, the >Write Data message explained below will not appear on the display. To format a CompactFlash card or the Microdrive or the RAM disk, see Formatting a Storage Device on page 1-88.

	You can format the Microdrive or the RAM disk using the operator panel
	when the first time you installed a new Microdrive or the RAM disk. About
Note	formatting a new Microdrive.

After writing is complete, you can print a list of data stored in the storage device for confirmation. See Printing a List of Data Names on page 1-89.

To write data to a CompactFlash card, the Microdrive or the RAM disk, proceed as follows:

1

2

Press the MENU key.

Press the or key repeatedly until Memory Card >, Hard Disk > or RAM Disk Mode > appears.

		Memory Card	>
3
	Press the > key.
4	Press the or key repeatedly until >Write Data appears.

>Write Data

5

6

Press the ENTER key. A question mark (?) appears.

>Write Data ?

Press the ENTER key. Processing appears, then Waiting.

1-84