Installing Option Units
A-28
Microdrive (Hard Disk)
Insert the Microdrive into its slot on the main circuit board of the printer. If
a Microdrive is installed in the printer, received data can be rasterized and
stored on this Microdrive. This enables high-speed printing of multiple
copies using an electric sort function. Also, you can use the e-MPS
functions. For details, see e-MPS on page 1-56.
For details of available Microdrives, see your dealer.
1Turn off the printer and disconnect the power cord and printer cable.
2Remove the two screws from the rear panel.
3Pull the main circuit board all the way out of the printer.
Rear Panel
Screws
Main Circuit
Board