Kyocera FS-1920 manual Resource Protection, Resource Prot Off, Resource Prot ? Off

Configuration

Resource Protection

When you switch from the PCL 6 emulation to another, all downloaded fonts and macros are lost. Resource protection preserves these PCL resources in memory so that they are intact when you change the emulation back to PCL 6.

Resource protection requires extra memory to store the downloaded fonts and macros. The total size of the printer memory recommended for

Note using the resource protection option is affected by several factors. See Appendix A.

1	Press the MENU key.
2	Press the			or	key repeatedly until Others > appears.
		Others			>
3
	Press the > key.
4	Press the			or	key repeatedly until >Resource Prot. appears.
		>Resource Prot.
			Off
5	Press the ENTER key. A blinking question mark (?) appears.
		>Resource Prot.
		? Off
6	Press the			or	key to display the desired mode. The display
	changes as shown below.
	Off (default)
	Permanent
	Perm / Temp
7	When the desired mode is displayed, press the ENTER key.
8	Press the MENU key. The message display returns to Ready.

1-103