Keys

The operator panel keys are used to configure the printer. Note the certain keys have the secondary function.

Understanding the Operator Panel

GO

 

?

CANCEL

MENU

ENTER

Settings made with these keys effect only the interface currently in use.

 

 

 

 

 

 

 

 

Note

 

 

 

Key

 

Function

 

 

• Switches the printer on-line and off-line.

 

 

• Prints and feed out one page.

 

GO

• Cancels specific errors.

Cancels a printing job.

To cancel, proceed as follows:

1 Check if Processing is displayed in the message display.

2 Press the CANCEL key.

3 Print Cancel? appears in the message display and then interface to be canceled.

Parallel

USB

 

Serial (appears only when an option serial interface board kit is installed)

CANCEL

Option (appears only when an option network interface card is installed)

 

Press the CANCEL key again if you wish to stop the cancellation of printing.

 

4 Select the interface to cancel using the or key and then press the ENTER key. Printing

 

from the selected interface will stop. Cancelling data appears in the message display

 

and printing stops after the current page is printed.

 

• Resets numeric values, or cancels a setting procedure.

 

• Used to stop the sounding of the alarm buzzer an error occurs.

 

 

 

• When pressed during mode selection, terminates the setting and the printer returns to the

Ready condition.

MENU

• Used to select the emulation, font, character code set; to read an CompactFlash card, and

 

more.

 

 

 

Used to access a desired item or enter numeric values. In some of the control procedures, the >

 

 

 

and < keys are used to enter or exit a sub item.

 

 

 

Used to access a desired item or enter of numeric values. In some of the control procedures, the

 

 

 

> and < keys are used to enter or exit a sub item.

 

 

 

 

 

 

 

Used as the < key in the mode selection function.

 

 

 

 

 

 

 

• Used as the > key in the mode selection function.

 

 

 

• Displays online help messages on the message display when paper jam errors occur. When

 

 

 

pressed in the Ready condition, displays explanations of online help messages. When pressed

?

 

 

 

 

while the online help is displayed, cancels the online help.

 

 

Finalizes numeric values and other selections.

ENTER

Table 1-5

If you hold down the ENTER key and press the MENU key when Ready is shown on this printer, the AdministrationID menu will be displayed. This menu is the setting menu for administration under the Account Management System and is normally not used. Press the MENU key to return to the Ready display.

1-5

Page 21
Image 21
Kyocera FS-1920 manual Keys, Key Function