Kyocera FS-1920 manual Dimm to be used, Installing Dimm

Expanding the Printer Memory

DIMM to be used

32 MB, 64 MB, 128 MB, and 256 MB DIMM can be used for memory expansion. See your Kyocera Mita dealer for purchasing information of the DIMM that are best suited for use with this printer.

Installing DIMM

Insert the DIMM into the socket as shown below.

1

2

3

4

5

Remove the DIMM from its package.

Open the clips on both ends of the DIMM socket.

Insert the DIMM into the socket, so that the notches on the DIMM align with the corresponding protusions in the socket.

Close the clips of the DIMM socket to secure the DIMM.

When you finish installing the DIMM, reinsert the main circuit board into the printer by reversing the removal procedure.

DIMM

Clip

Clip Socket

A-6