Kyocera FS-1920 manual RAM Disk Mode ? On, RAM Disk Size Mbyte

Operating the Storage Device

3	The default setting is Off. Press the ENTER key. A blinking question
	mark (?) appears. Select On using the or key, and then press the
	ENTER key.
		RAM Disk Mode
		? On
4	Press the > key to display >RAM Disk Size.
		>RAM Disk Size
			0023 Mbyte
5	Press the ENTER key again, and change the RAM disk size using the
			or key. It is not possible to make a setting that exceeds total

printer memory. The default value for the RAM disk is the total printer memory minus 9 MB. This parameter may be set anywhere from 0001 to 1024 depending on the available printer memory.

6

7

When the desired RAM disk size is displayed, press the ENTER key.

Press the MENU key and restart the printer. The setting will be activated after restart.

1-82