Kyocera FS-1920 manual Baud Rate Data Bits, Stop Bits, Parity None Protocol DTRpos.&XON

Interface

6	Press the > key. Each time the or key is pressed, the setting item
	and current setting change as shown below.

>Baud Rate 9600

>Data Bits 8

Definable baud rates: 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200

Definable data bits: 7, 8 (default)

>Stop Bits 1

Definable stop bits: 1 (default), 2

>Parity None

>Protocol

DTR(pos.)&XON

Definable parity: None (default), Odd, Even,

Ignore

Definable protocol: DTR(pos.)&XON (default), DTR(positive), DTR (negative), XON/XOFF, ETX/ACK

7	Display the setting item to be changed and press the ENTER key. A
	question mark (?) appears.

The following example explains how to change the baud rate. The settings for other items can be changed in a similar manner.

>Baud Rate

?9600

	8	Press the or key to display the desired setting. The setting
		changes as shown below.
		The baud rate can be selected from 1200, 2400, 4800, 9600 (default),
		19200, 38400, 57600, and 115200.
	Some computers may not be compatible with a baud rate of 115200 bps.
	If you set the baud rate to 115200 and communication problems occur,
	lower the baud rate.
Note
	9	Display the desired baud rate and press the ENTER key.
	10	Press the MENU key. The message display returns to Ready.

1-77