Kyocera FS-1920 manual Auto Continue Setting, Auto Continue Mode On, Auto Continue Mode ? On

Configuration

Auto Continue Setting

When Auto Continue is enabled, the printer will automatically print the next received data following a preset amount of time passes after any one of the following errors occurs:

Memory overflow Press GO

Print overrun Press GO

KPDL error Press GO

File not found Press GO

Hard disk err Press GO

RAM disk error Press GO

MemoryCard err Press GO

Duplex disabled Press GO

If one of the above errors is caused by someone on a network where the printer is being shared, for example, data sent from another person will be printed after a preset amount of time.

1

2

3

4

Press the MENU key.

Press the or key repeatedly until Others > appears.

Others >

Press the > key.

Press the or key repeatedly until Auto Continue > appears.

>Auto Continue >

Mode On

5 Press the ENTER key. A blinking question mark (?) appears.

>Auto Continue

Mode ? On

6

7

8

Select On or Off using the or key.

Press the ENTER key.

Press the MENU key. The message display returns to Ready.

1-105