Kyocera FS-1920 manual Perm. Code JOB Size 050MB, Size 05 0MB

e-MPS

8	Press the or key to increase or decrease, respectively, the value
	at the blinking cursor. Use the > and < keys to move the cursor right

and left.

9

10

When the desired size is displayed, press the ENTER key.

Press the MENU key. The message display returns to Ready.

Maximum Space Assigned to Permanent Code Jobs

This changes the Microdrive space that holds permanent code jobs. You can change the maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of free Microdrive space, however. The default size is 50 MB.

1	Press the MENU key.
2	Press the		or	key repeatedly until e-MPS > appears.
		e-MPS		>
3
	Press the > key.
4	Press the		or	key repeatedly until >e-MPS Configuration >
	appears.

>e-MPS > Configuration

5	Press the > key.
6	Press the or key repeatedly until >>Perm. Code JOB Size
	appears.

>>Perm. Code JOB

Size 050MB

7 Press the ENTER key. A blinking cursor ( ) appears.

>>Perm. Code JOB
Size	050MB

8	Press the or key to increase or decrease, respectively, the value
	at the blinking cursor. Use the > and < keys to move the cursor right

and left.

1-72