Kyocera FS-1920 manual EF-60 Envelope Feeder, Installing the envelope feeder on the printer

Installing Option Units

EF-60 Envelope Feeder

Install the option envelope feeder at the front of the printer. By installing the envelope feeder, you can print on a wide variety of different envelope sizes. And the EF-60 feeds envelopes automatically, making it easy to print on large quantities of envelopes at one time.

Installing the envelope feeder on the printer

Turn OFF the power to the printer before installing the envelope feeder.

Note

1	Pull the printer’s paper transfer unit release lever (green colored),
	then draw the paper transfer unit fully out of the printer.

Paper Transfer Unit Release Lever (green colored)

	Paper Transfer Unit
2	Gently tilt the MP tray toward the printer until that it rests on its
	side as shown in the figure, and remove the MP tray from the printer

by lifting it straight upward. MP tray

A-21