Kyocera FS-1920 manual Table C-1

Specifications

Specifications

Item	Description
Printing method	Electrophotography, laser scan
Printing speed	28 pages/minute (A4 size) when printing multiple copies of the same page
Resolution	Fast 1200 mode with KIR [Kyocera Image Refinement]
	600 dpi with KIR (Kyocera Image Refinement)
	300 dpi with KIR (Kyocera Image Refinement)
First print	Approx. 19.5 seconds or less (A4 size), depending on input data
Warm-up time	Approx. 10 seconds or less (from sleep mode)
	Approx. 18 seconds or less (from power on)
	at 23 °C, 120 or 230 V
Controller	PowerPC 405 (266 MHz)
Main memory	32 MB, expandable up to 288 MB
Interfaces	Parallel: IEEE1284, 1
	USB: Full-Speed 2.0, 1
	Option: Serial interface/Network interface card, 1
Memory card slot	1 (CompactFlash card)
Hard disk slot	1 (Microdrive)
Self test	Performed at power-up
Maximum duty cycle	100,000 pages/month
Drum	Amorphous silicon drum
Developer	Mono-component dry developer
Main charger	Positive scorotron charger
Transferring	Negative charger roller
Separation	Curvature separation
Drum cleaning	Blade cleaner
Drum discharging	Illumination by eraser LED array
Fuser	Heat roller and pressure roller
Toner saving	Ecoprint mode
Paper	Plain paper (See Chapter 2)
Paper feed trays	Cassette: A5 to A4/Letter universal cassette 148 to 216 mm × 210 to 297 mm.
	Holds 500 sheets of thickness 0.11 mm
	For U. S. A.: A5 to A4/Letter and Legal universal cassette 5-13/16 to
	8-1/2" × 8-1/4 to 14"
	MP tray: 70 to 216 mm (2-3/4 to 8-1/2") × 148 to 297 mm (5-13/16 to 11-11/16")
	(see page 2-4). Holds 100 sheets of thickness 0.11 mm
Capacity of output trays	Top tray  250 sheets of thickness 0.11 mm
	Rear tray (Option)  PT-4: 250 sheets of thickness 0.11 mm
	PT-60: 100 sheets of thickness 0.11 mm

Table C-1

C-2