Paper Handling

Paper Handling

This section explains how to use the operator panel to change the paper size and type for each paper source, the mode for the MP (multi-purpose) tray, and other settings regarding paper handling.

Setting the Paper Size

Set the paper sizes according to the sizes of paper to be set in the paper cassette and the MP tray.

If they do not match, printing will not be made on the correct size paper when automatic paper size selection is made by the application software (printer driver).

Setting the Paper Size in Paper Cassette

To set the standard sizes A5, A4, B5, Letter, and Legal (for U. S. A. only) size for the paper cassette, use the following procedure to set the paper size dial of the paper cassette.

If you use a non-standard size, see Custom Paper Size on next page.

Properly set the paper into the paper cassette. For details about the adjustment of the paper guides and paper stopper inside the paper cassette, set the Installation Guide supplies with the printer.

1

Turn the paper size dial so that the size of the paper you are going to

use appears in the paper size window.

 

Paper Size Dial

Paper Size Window

2

Adjust the paper guides and paper stopper inside the paper cassette

to the size of the paper to be used and load the paper into the

cassette.

The paper size setting for the paper cassette is completed.

1-24

Page 40
Image 40
Kyocera FS-1920 manual Paper Handling, Setting the Paper Size in Paper Cassette