Kyocera FS-1920 manual USB Universal Serial Bus Interface, Mps, Printer control language Prescribe

USB (Universal Serial Bus) Interface

This printer supports Full-Speed USB 2.0 standards. Connection to a computer with a USB interface gives a higher communication speed than parallel interface connection.

e-MPS

‘e-MPS’ is an abbreviation for ‘enhanced-Multiple Printing System,’ which is a post-processing function that combines electronic sorting, job retention, and virtual mailboxing.

When printing multiple copies of a document, the data is transferred from the computer to the printer only for the first copy; the data is then stored on the printer’s hard disk. Copies of the document are printed using the stored data.

Printing is performed faster with less computer spooling time and less network traffic.

Furthermore, printed data that is stored on the hard disk can be called up using job retention functions, such as Quick Copy etc., allowing you to quickly print additional copies of a document from the printer at any time, without needing to re-spool the document or start up the computer system.

Printer control language PRESCRIBE

The printer uses PRESCRIBE, Kyocera Mita’s page printer control language with enhanced color graphics capabilities. The simple commands of PRESCRIBE allow the programmers to easily define pagination and device control.

KPDL3 (Kyocera Printer Description Language 3)

KPDL3 is the Kyocera’s implementation of the PostScript page description language Level 3. The printer has 80 fonts that are compatible with Adobe PostScript fonts. (The printer also has 80 PCL fonts.)

PDF direct printing

Allows you to send a selected PDF file directly to the printer without invoking a printer driver.

Account management system

The account management system function records the number of pages printed by each department. The administrator can preset the maximum number of pages that each department will be allowed to print.

xi