Paper Handling

Overriding A4 and Letter Size Difference

This selects whether to enable or disable the difference between A4 size and Letter size. Under the default setting of Off, the paper size of the paper source is matched to the paper size formatting the jobs. If these differ, a corresponding error message is displayed. When this is set to On, printing is performed even if the actual paper size differs from the paper size formatting the jobs.

1

2

3

4

Press the MENU key.

Press the or key repeatedly until Paper Handling > appears.

Paper Handling >

Press the > key.

Press the or key repeatedly until >Override A4/LT appears.

>Override A4/LT

Off

5 Press the ENTER key. A blinking question mark (?) appears.

>Override A4/LT

? Off

6

7

8

Select On or Off using the or key.

Press the ENTER key.

Press the MENU key. The message display returns to Ready.

1-40

Page 56
Image 56
Kyocera FS-1920 manual Overriding A4 and Letter Size Difference, Override A4/LT Off, Override A4/LT ? Off