Kyocera FS-1920 manual Automatic Form Feed Timeout, Form Feed Time Out 030sec

Configuration

Automatic Form Feed Timeout

When the printer receives no data for a certain time, it time out and releases the current interface: it prints whatever data it has in its buffer and feeds out the page. You can adjust the time-out time as follows:

1	Press the MENU key.
2	Press the		or	key repeatedly until Others > appears.
		Others		>
3
	Press the > key.
4	Press the		or	key repeatedly until >Form Feed Time appears.
	The default setting is 30 seconds.

>Form Feed

Time Out 030sec.

5 Press the ENTER key. A blinking cursor ( ) appears.

>Form Feed Time.

Time Out 030sec.

6	Press the or key to increase or decrease the value of the figure
	where the cursor is blinking and set the desired time. The time can

be set between 0 and 495 seconds, in 5-second increments. You can use the > and < keys to move the cursor right and left.

7

8

Display the desired time and press the ENTER key.

Press the MENU key. The message display returns to Ready.

1-99