Indicators and Messages
Message |
| Corrective Action |
|
| ||
Load Cassette # | There is data for printing that matches with a paper cassette setting (paper size, | |||||
(paper size)/(paper type)†† | paper type), but there is no paper in the paper cassette. |
|
| |||
|
| Set paper into the paper source as displayed on the operator panel, and press the | ||||
|
| GO key to restart printing. However, the paper source number (#) is only displayed | ||||
|
| when there is an option paper feeder installed. |
|
| ||
|
| Or, if you want to print from a different paper source press the | and | key to display | ||
|
| Use alternative? and you can change the source for paper feeding. |
| |||
|
| After selecting a paper source and pressing the MENU key, Paper Handling > | ||||
| ; | appears. By pressing the > key, the paper type settings menu appears. After setting | ||||
| the correct paper type, press the ENTER key and printing starts. |
| ||||
Load MP tray |
| There is no paper cassette set (paper size, paper type) that matches with the data for | ||||
(paper size)/(paper type)†† | printing, so printing is done from the MP tray. Set paper into the MP tray that | |||||
|
| matches the paper size and type shown on the display and press the GO key to restart | ||||
|
| printing. |
|
| ||
|
| Or, if you want to print from a different paper source press the | and | key to display | ||
|
| Use alternative? and you can change the source for paper feeding. |
| |||
|
| After selecting a paper source and pressing the MENU key, Paper Handling > | ||||
| ; | appears. By pressing the > key, the paper type settings menu appears. After setting | ||||
| the correct paper type, press the ENTER key and printing starts. |
| ||||
Missing |
| The duplex drawer is either not installed or incorrectly inserted. Insert the duplex | ||||
duplex drawer |
| drawer securely. |
|
| ||
Option interface | A failure has occurred with the option network interface card. |
|
| |||
Error |
| Check the option interface installed in the printer. |
|
| ||
Paper jam |
| Open the top cover or the paper transfer unit and correct the paper jam (or paper mis- | ||||
############### | feeding in the paper cassette). The location of the paper jam is also indicated in place | |||||
| ; | of the #’s. Online help messages which are useful for correcting the paper jam will be | ||||
| displayed by pressing the | ? | key. (See Correcting a Paper Jam on page | |||
|
| |||||
Remove paper | ## | There is still paper in the option sorter’s tray indicated by # when the power was | ||||
sorter tray | turned on or the sorter’s mode was switched. Remove all the paper inside the sorter. | |||||
| ; |
|
|
|
|
|
Replace toner |
| Replace the toner container using a new toner kit. The printer does not operate when | ||||
Clean printer | ; | this message is displayed. See Toner Container Replacement on page | ||||
|
|
|
|
|
| |
Set paper |
| The MP tray is out of paper. Load paper and press the GO key. (Note that feeding the | ||||
Press GO |
| paper having a paper size which does not match the current paper size from the MP | ||||
|
| tray can cause paper jam.) |
|
| ||
Sorter tray | ## | The sorter tray indicated by # is now full. Remove some of the paper from the sorter | ||||
paper full | ; | tray concerned. |
|
| ||
|
|
|
|
|
| |
Toner low |
| Replace the toner container using a new toner kit. See Toner Container | ||||
|
| Replacement on page |
|
| ||
Top tray |
| The top tray has become full (approx. 250 pages). You must remove all printed pages | ||||
paper full |
| from the top tray. When the printer senses that the top tray is empty again, it will | ||||
;continues printing into the top tray.
;:Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.
Table
