Lexmark 35S6701, 35S3332, 34TT016 AppleTalk menu, Standard USB menu, Activate, View Name, Set Zone

Understanding the printer menus	155
Use	To
View Security Mode	View the encryption method for the wireless network.

AppleTalk menu

Note: This menu appears only in printer models that are connected to an Ethernet network or when an optional wireless network adapter is installed.

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > AppleTalk

•Network/Ports > Network [x] > Network [x] Setup > AppleTalk

Use	To
Activate	Enable or disable AppleTalk support.
Yes	Note: Yes is the factory default setting.
No
View Name	Show the assigned AppleTalk name.
	Note: The AppleTalk name can be changed only from the Embedded Web
	Server.
View Address	Show the assigned AppleTalk address.
	Note: The AppleTalk address can be changed only from the Embedded Web
	Server.
Set Zone	Provide a list of AppleTalk zones available on the network.
[list of zones available on the network]	Note: The default zone for the network is the factory default setting.

Standard USB menu

Use	To
PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job received
On	through a USB port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PostScript emulation if the PS SmartSwitch is set to On. It uses the default
	printer language specified in the Setup menu if the PS SmartSwitch is set to
	Off.
PS SmartSwitch	Set the printer to automatically switch to PS emulation when a print job received
On	through a USB port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if the PCL SmartSwitch is set to Off.