Lexmark MX611DHE, 35S6701, 35S3332, 34TT016 manual Imaging unit nearly low 84.xy, Incompatible tray x

Troubleshooting 258

Imaging unit nearly low [84.xy]

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Imaging unit very low, [x] estimated pages remain [84.xy]

You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, touch Continue on the printer control panel to clear the message and continue printing.

Incompatible tray [x] [59]

Try one or more of the following:

•Remove the indicated tray.

•From the printer control panel, touch Continue to clear the message and continue printing without using the indicated tray.

Incorrect paper size, open [paper source] [34]

Try one or more of the following:

•Load the correct size and type of paper in the tray, and then specify the paper size and type in the Paper menu on the printer control panel.

•Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings.

•Check if the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed.

•Check the length and width guides and make sure the paper is loaded properly in the tray.

•From the printer control panel, touch Continue to clear the message and print using a different tray.

•Cancel the print job.

Insufficient memory to collate job [37]

Try one or more of the following:

•From the printer control panel, touch Continue to print the part of the job already stored and begin collating the rest of the print job.

•Cancel the current print job.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

•From the printer control panel, touch Continue to stop the defragmentation and continue printing.

•Delete fonts, macros, and other data in the printer memory.

•Install additional printer memory.