Additional printer setup

31

3Align the notch (1) on the memory card with the ridge (2) on the connector.

1

2

4Push the memory card straight into the connector, and then push the card toward the controller board wall until it clicks into place.

5Close the controller board shield, and then the controller board access door.

Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 49.

Page 31
Image 31
Lexmark 35S3332, 35S6701, 34TT016, MX611DHE, MX611DE manual