Lexmark 35S3332 manual Print Settings, Understanding the printer menus 196, Copies, Duplex Binding

Understanding the printer menus 196

Print Settings

Copies	Specify a default number of copies for each print job.
1–999	Note: 1 is the factory default setting.
Paper Source	Set a default paper source for all print jobs.
Tray [x]	Note: Tray 1 is the factory default setting.
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate	Stack the pages of a print job in sequence when printing multiple copies.
(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)
Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
1 sided	Note: “1 sided” is the factory default setting.
2 sided
Staple	Specify whether prints are stapled.
Off	Notes:
On
	• Off is the factory default setting.
	• This menu appears only when a staple finisher is installed.
Duplex Binding	Define binding for duplexed pages in relation to page orientation.
Long Edge	Notes:
Short Edge
	• Long Edge assumes binding along the long edge of the page (left edge for portrait and top
	edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for portrait and
	left edge for landscape).
Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
Off	Notes:
2‑Up
	• Off is the factory default setting.
3‑Up
	• The number selected is the number of page images that will print per side.
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Ordering	Specify the positioning of multiple‑page images.
Horizontal	Notes:
Reverse Horizontal
	• Horizontal is the factory default setting.
Reverse Vertical
	• Positioning depends on the number of page images and whether they are in portrait or
Vertical
	landscape orientation.