Lexmark 35S6701, 35S3332, 34TT016, MX611DHE, MX611DE manual Understanding the printer menus 170

Understanding the printer menus		170
	Use	To
	Timeouts	Set the printer to operate at a low power state.
	Timeout	Notes:
	Disabled
		• Disabled is the factory default setting in all countries except
	1–3 hours
		in European Union countries and Switzerland.
	6 hours
		• “3 days” is the factory default setting in European Union
	1–3 days
		countries and Switzerland.
	1–2 weeks
	1 month
	Timeouts	Set the printer to Hibernate Timeout even when there is an active
	Hibernate Timeout on Connection	Ethernet or phone connection.
	Hibernate	Note: Do Not Hibernate is the factory default setting.
	Do Not Hibernate
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the printer display to Ready state.
	15–300	Note: 30 is the factory default setting.
	Timeouts	Show a message that lets you reset the screen timeout timer
	Prolong Screen Timeout	instead of returning to the home screen.
	On	Note: Off is the factory default setting.
	Off
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255	Notes:
		• 90 is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535	• 40 is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.