Lexmark 35S6701, 35S3332 manual Understanding the printer menus 200, Separator Source, Staple Job

Understanding the printer menus		200
	Use	To
	Separator Sheets	Specify whether blank separator sheets are inserted.
	Off	Notes:
	Between Copies
		• None is the factory default setting.
	Between Jobs
		• Between Copies inserts a blank sheet between each copy of a print job if
	Between Pages
		Collate is set to “(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a
		blank page is inserted between each set of printed pages, such as after all
		page 1's and after all page 2's.
		• Between Jobs inserts a blank sheet between print jobs.
		• Between Pages inserts a blank sheet between each page of a print job. This
		setting is useful when printing transparencies or when inserting blank pages in
		a document.
	Separator Source	Specify the paper source for separator sheets.
	Tray [x]	Notes:
	Manual Feeder
		• Tray 1 (standard tray) is the factory default setting.
		• From the Paper menu, set Configure MP to "Cassette" for Manual Feeder to
		appear as a menu setting.
	Paper Saver	Print multiple‑page images on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Ordering	Specify the positioning of multiple‑page images when using Paper Saver.
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of page images and whether they are in
	Vertical
		portrait or landscape orientation.
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	Paper Saver Border	Print a border when using Paper Saver.
	None	Note: None is the factory default setting.
	Solid
	Staple Job	Specify whether printed output is stapled.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu item appears only when a supported staple finisher is installed.