Printing from DOS
To change DOS print settings from the printer software:
1 Open the printer's Control Program.
For help opening the Control Program, see “Opening the Control Program” on page 8.
2 Click the DOS Printing Tab.
3 Change settings as needed.
4 Click OK to save the settings.
Note: When you make changes on the DOS Printing Tab, they apply to DOS print jobs only. When you make changes on other tabs, they apply to all print jobs.
Printing from DOS applications
This section describes how to print from:
•DOS applications in Windows
•native DOS
DOS applications in Windows
Use these instructions only if your application runs from the DOS prompt in Windows. This section describes:
•printing from a DOS application
•printing from a DOS application to another printer
•printing to a file
Printing from a DOS application
When you print from a DOS application, your printer uses PCL 3 emulation. You must install a printer driver for PCL 3 emulation in each DOS application.
36 Printing from DOS
