9.7.2 PIN code request
You can activate a PIN (Personal Identification Number). You can check the current status of configuration from the status bar.
PIN request and release procedures
Item | Description |
|
|
Enable PIN Request | You have to input the PIN code each |
| time the mobile phone is turned on. |
|
|
Disable PIN Request | You do not have to input the PIN code |
| when the mobile phone is turned on. |
|
|
1. Select ‘PIN Code Request’ item from the list, and press [Select]. Then a window allowing you to select ‘On’ or ‘Off’ appears.
-Select ‘On’/‘Off’ from the list, press [Select], and input the current PIN code to set the PIN request. If ‘PIN Code Request’ is already enabled/disabled, an “Already activated”/ “Already cancelled” message will be displayed.
2. 3 incorrect PIN code entries in the PIN code input window would invalidate the PIN code. In this case, you have to input the PUK (PIN Unblock Key) code to configure the PIN code again.
Settings
3. The maximum allowed number of attempts of PUK input is 10 times. ATTENTION: after having entered 10 times an incorrect PUK code, the SIM card will be blocked and must be replaced.
Press the C key in the PIN code input window to return to the previous step.
9.7.3 Call barring
Call barring menus for All calls, Video, Voice are provided.
However, available menus are determined by the SIM supporting CPHS.
The menu consists of All calls, Video, Voice.
The All calls menu provides menus to barring all calls and the Video menu provides menus to barring video calls. the Voice menu provides menus to barring voice calls. The All call,Video and Voice menus have the following submenus.
If you select All calls, Outgoing calls, International calls, International except home country, Incoming calls, and Incoming calls when abroad submenus. menu list appears.
101
