Linear DUAL 824 manual Test Mode, Sensor Function Table

TEST MODE

✦Even though this is a self-monitoring supervised system, the National Burglar and Fire Alarm Association recommends that all security systems be tested manually on a regular basis.

1.The system must be in Off Mode before switching to Test Mode.

2.Switch the system into Test Mode by entering a user code and pressing TEST.

✴When the system is switched to the Test Mode, the keypad(s) will sound a “Gong” and four “Beeps”.

3.Holding down the TEST button in Test Mode will light all of the keypad’s indicators.

✴The sensor status indicators will fl ash for each sensor programmed into the Control Panel.

4.Go to each sensor and press its test button or open and close the protected opening.

5.To test the wireless keypad, press the wireless keypad’s key.

✴The keypad(s) will make a “Bing” sound as each sensor is tested, followed by 1-3 beeps indicating signal strength with 3 beeps being the strongest signal.

✴As each sensor is tested, the sensor status indicator for the sensor will stop fl ashing and return to showing the current status of the sensor.

6.Continue testing until there are no flashing sensor status indicators.

✎NOTE: If the system is left unattended in Test Mode, it will automatically switch back to Off Mode after three minutes.

✦When directly connecting (without a telephone line) to the DUAL 824 with the RA-2400 remote access software (Version 1.3 or later), press the EMERGENCY key while in Test Mode to cause the control panel to connect to the modem.

TEST MODE

START IN OFF MODE

(OPTIONAL)

YOUR

USER

CODE

1GONG & 4 BEEPS

DONE

SENSOR OPERATION IN EACH SYSTEM MODE

SENSOR FUNCTION	OFF MODE	CHIME MODE		HOME MODE	AWAY MODE
AUTOMATION		ACTIVATES AND DEACTIVATES THE AUTOMATION OUTPUT
EMERGENCY		ARMED 24-HOURS - TRIGGERS EMERGENCY ALARM
PANIC		ARMED 24-HOURS - TRIGGERS SILENT PANIC ALARM
FIRE		ARMED 24-HOURS - TRIGGERS FIRE ALARM
PERIMETER	DEACTIVATED	CHIME		INSTANT BURGLARY ALARM
EXIT/ENTRY	DEACTIVATED	CHIME		DELAYED BURGLARY ALARM
					INSTANT BURGLARY ALARM UNLESS
INTERIOR	DEACTIVATED	DEACTIVATED		DEACTIVATED	ACTIVATED DURING AN ENTRY
					DELAY, THEN IT IS DELAYED
CHIME			CHIME
2-BUTTON ARM/DISARM (LEFT)	LEFT BUTTON SWITCHES SYSTEM TO AWAY MODE †
2-BUTTON AUTOMATION (RIGHT)				LEFT BUTTON SWITCHES SYSTEM TO OFF MODE ‡
	IF ALARM MEMORY IS ACTIVE, SWITCHES SYSTEM TO OFF MODE ‡
EMERGENCY (BOTH BUTTONS)
2-BUTTON ARM (LEFT)	LEFT BUTTON SWITCHES SYSTEM TO AWAY MODE †
2-BUTTON DISARM (RIGHT)				RIGHT BUTTON SWITCHES SYSTEM TO OFF MODE ‡
	IF ALARM MEMORY IS ACTIVE, SWITCHES SYSTEM TO OFF MODE ‡
EMERGENCY (BOTH BUTTONS)
ENVIRONMENTAL		ARMED 24-HOURS - TRIGGERS ANNUNCIATION ONLY
INTERIOR HOME	DEACTIVATED	DEACTIVATED		INSTANT BURGLARY ALARM

†CAN BE HOME MODE USING PROGRAMMING STEP 50

‡ CAN BE CHIME MODE USING PROGRAMMING STEP 51

SENSOR FUNCTION TABLE

24