13.ADVANCED PROGRAMMING
✦To perform any of the advanced programming steps, the system must be in the Setup Mode.
✦Each programming function is performed with similar keystrokes. After the system is in Setup Mode, enter the programming step or sensor number and press HOME, then enter the new value and press AWAY. For reference, follow the figures next to the programming steps.
✴If the new value is accepted, a “bing” will sound. If the new value is not accepted, a “double buzz” will sound.
ENTERS PROGRAM STEP OR
SENSOR NUMBER TO MODIFY
STORES NEW VALUE
SETUP MODE
1.Start with the system in Test Mode (Setup Mode cannot be reached from any other mode).
2.From Test Mode, enter the master user code then press TEST.
✎NOTE: Only the master user code can be used to put the system into the Setup Mode. The restricted user codes cannot access Setup Mode, only Code Mode.
✴A “Gong” and fi ve “Beeps” will sound, signaling that the system is in Setup Mode.
3.After programming changes are complete, press the OFF key for three seconds to exit Setup Mode.
✎NOTE: If the system is left unattended in Setup Mode, it will automatically switch back to Off Mode after three minutes.
CONTROL PANEL PROGRAMMING OPTIONS
STEP # | PROGRAMMING FUNCTIONS |
| POSSIBLE VALUES | FACTORY VALUE | INSTALLATION VALUE |
25 | ENTRY DELAY | 30 |
| ||
|
|
|
|
| |
26 | EXIT DELAY | 60 |
| ||
|
|
|
|
| |
30 | BURGLARY SIREN TIME | 5 |
| ||
|
|
|
|
| |
31 | EMERGENCY SIREN TIME | 5 |
| ||
|
|
|
|
| |
32 | FIRE SIREN TIME | 5 |
| ||
|
|
|
|
| |
40 | AUTOMATION OUTPUT TIME | 0 |
| ||
|
|
|
|
|
|
50 | REMOTE ARMING MODE | 2 | = HOME MODE; 3 = AWAY MODE | 3 |
|
|
|
|
|
|
|
51 | REMOTE DISARMING MODE | 0 | = OFF MODE; 1 = CHIME MODE | 0 |
|
|
|
|
|
|
|
61 | ENTRY DELAY BEEPS | 0 | = OFF; 1 = ON | 1 |
|
|
|
|
|
|
|
62 | EXIT DELAY BEEPS | 0 | = OFF; 1 = ON | 1 |
|
|
|
|
|
|
|
63 | SILENT BURGLARY ALARM | 0 | = AUDIBLE; 1 = SILENT | 0 |
|
|
|
|
|
|
|
64 | SILENT EMERGENCY ALARM | 0 | = AUDIBLE; 1 = SILENT | 0 |
|
|
|
|
|
|
|
65 | QUICK ARMING | 0 | = OFF; 1 = ON | 1 |
|
|
|
|
|
|
|
66 | AUTO RESTORE | 0 | = OFF; 1 = ON | 1 |
|
|
|
|
|
|
|
67 | AUTO BYPASS | 0 | = OFF; 1 = ON | 0 |
|
|
|
|
|
|
|
68 | AUTOMATION MODE DURING ALARM | 0 | = FLASH (ENABLED BY FUNCTION 72) | 0 |
|
1 | = STEADY (ENABLED BY FUNCTION 72) |
| |||
|
|
|
| ||
69 | AUTOMATION BING TOME | 0 | = NO BINGS | 1 |
|
1 | = BINGS |
| |||
|
|
|
| ||
70 | REMOTE ARM/DISARM CHIRP | 0 | = NO CHIRPS | 1 |
|
1 | = CHIRPS (1 CHIRP = ARMED, 2 CHIRPS = DISARMED) |
| |||
|
|
|
| ||
71 | AUTOMATION FLASHES AFTER ALARM | 0 | = STANDARD | 0 |
|
1 | = FLASHING AFTER ALARM |
| |||
|
|
|
| ||
|
| 0 | = STANDARD |
|
|
72 | AUTOMATION ACTIVE DURING ALARM | 1 | = AUTOMATION ACTIVE DURING ALARM | 0 |
|
|
| (FLASH OR STEADY PROGRAMMED BY FUNCTION 68) |
|
| |
73 | AUTOMATION ON WHILE ARMED | 0 | = STANDARD | 0 |
|
1 | = ON WHILE ARMED |
| |||
|
|
|
| ||
74 | AUTOMATION ON DURING EXIT/ENTRY | 0 | = STANDARD | 0 |
|
1 | = ON DURING EXIT/ENTRY DELAY |
| |||
|
|
|
| ||
75 | AUTOMATION POLARITY | 0 | = + WHEN OFF; 1 = + WHEN ON | 1 |
|
|
|
|
|
| |
87 | REMOTE ACCESS PASSWORD | 6 DIGITS | 987654 |
| |
92 | DURESS CODE | REMOVED |
| ||
|
|
|
|
| |
93 | RESTRICTED USER CODE #1 | REMOVED |
| ||
|
|
|
|
| |
94 | RESTRICTED USER CODE #2 | REMOVED |
| ||
|
|
|
|
| |
95 | RESTRICTED USER CODE #3 | REMOVED |
| ||
|
|
|
|
| |
96 | RESTRICTED USER CODE #4 | REMOVED |
| ||
|
|
|
|
| |
97 | RESTRICTED USER CODE #5 | REMOVED |
| ||
|
|
|
|
| |
98 | PAGE ALERT USER CODE | REMOVED |
| ||
|
|
|
|
| |
99 | MASTER USER CODE | 1234 |
| ||
|
|
|
|
|
|
Control Panel Programming Table
29
