4.HARDWIRED KEYPAD FEATURES
8
7
9
6 | 10 |
5 
4 
11
7SENSOR STATUS INDICATORS
★
★Indicate the status of each of the system's wireless sensors and hardwired loops.
★Indicators show which doors and windows are open.
★Indicators fl ash to display sensors that have caused an alarm.
★
8SYSTEM STATUS INDICATORS
★Shows the current status of the system.
READY LIGHT
★Lights when all system sensors are closed.
★Shows that the system is ready to be armed.
★The system can be armed without the READY indicator being lit, if sensors are bypassed either manually or automatically.
ARMED LIGHT
★Blinks during the exit delay.
★Lights when the system is fully armed.
3
2
1
TROUBLE LIGHT
★Lights when the system has detected supervisory trouble.
★Supervisory trouble can be caused by power, sensor low battery, or sensor radio supervision conditions.
★Press
for one second then view the system supervisory and status indicators to determine the origin of the trouble.
1BEAUTY COVER
★The beauty cover snaps open and shut to hide the keypad’s keys, mode and supervisory indicators, and the sensor location labeling area.
2KEYPAD
★Backlit keys for easy viewing in low light conditions.
★For entering the user's user code (numerically or alphabetically).
★Used when programming system options.
★Press 
to activate the Automation Output.
★Press
to clear keypad if the wrong key is pressed.
★Press
for two seconds to view sensor battery and supervisory status (see BATTERIES and RADIO indicator description).
3
★Pressing FIRE for two seconds sounds the fi re siren and sends a “fi re” message to a central monitoring station through the digital communicator (if the system is monitored).
★Pressing EMERGENCY for two seconds sounds the emergency siren and sends an “emergency” message to a central monitoring station through the digital communicator (if the system is monitored).
★Both work even when system is disarmed.
★IMPORTANT: For personal emergency use only. Not for use as a UL Listed Medical Alert System.
4SYSTEM SUPERVISORY INDICATORS
★Shows the current status of the system.
POWER LIGHT
★Glows when AC power is on.
★Blinks when AC power is off and backup battery is installed.
★Blinks when the backup battery is low, recharging or missing.
★Off when AC power is off and no backup battery is installed (system disabled).
BATTERIES LIGHT
★Blinks when one or more sensors have a low battery.
★Press
for two seconds to view sensor status. Sensor status indicator for any sensor with a low battery will light along with the BATTERIES indicator.
★Switch to Test Mode after replacing the sensor battery and completely test the system (see Test Mode). Switching to Test Mode clears the low battery indication.
RADIO LIGHT
★Blinks when one or more sensors have not reported status during the eight hour status time period.
★Press
for two seconds to view sensor status. Sensor status indicator for any sensor that has not reported in will light along with the TROUBLE indicator.
★Switch to Test Mode after servicing the sensor and completely test the system (see Test Mode). Switching to Test Mode clears the trouble indication.
5MODE INDICATORS
★The indicators next to the mode keys light to show the current system mode.
★HOME indicator will blink during Secure Exit and Home Instant modes.
★AWAY indicator will blink during the exit delay in the Away Mode.
6MICROPHONE (OPTIONAL)
★Location for the high sensitivity microphone included with the Model
★Detects room audio when communicator is reporting to the Central Station in
9MODE BUTTONS
★Used to operate the system.
OFF
★Off Mode disarms the system.
★Switching to Off Mode stops the alarm siren.
✓Multiple Beeps sound and sensor status indicators fl ash if an alarm has occurred.
☞Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
CHIME
★Chime Mode disarms the system.
★Switching to Chime Mode stops the alarm siren.
✓Multiple Beeps sound and sensor status indicators fl ash if an alarm has occurred.
☞Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
★ Chime Mode is for monitoring doors and windows.
✓Use this mode as an “automatic door chime” when at home.
✓Opening any protected door or window causes the keypad(s) to
HOME
★Home Mode arms the perimeter sensors, but not the interior sensors.
✓Use this mode when anyone is staying behind.
✓Interior motion detectors and interior door sensors are not armed.
✓Home secure mode makes all delayed perimeter sensors instant.
✓Secure exit mode starts an exit delay while remaining in Home Mode.
✓
AWAY
★Away Mode arms the entire system.
✓Use this mode when leaving home.
✓Door sensors set for delayed will have a time delay that allows the user to leave and enter the premises without sounding the alarm.
✓
✓Entry Delay Beeps warn the user to disarm the system before the siren starts.
TEST
★Test Mode is for testing the system sensors.
✓All sensor status lights blink when the Test Mode is entered.
✓Each sensor status light will stop blinking when its sensor is tested.
★Hold the TEST button down to test all of the keypad's indicator lights.
10SOUNDER
★Makes unique sounds for burglary, fi re and emergencies.
★Alarm sirens stop automatically after fi ve minutes.
★Sounds advisory tones to confi rm keystrokes from the keypad.
★Sounds mode selection tones.
★Sounds alarm memory tones.
★Beeps when Automation Output is activated.
★The Control Panel has terminals available for an external siren.
11SPEAKER (OPTIONAL)
★Location for the speaker included with the Model
★Sounds voice operating prompts and audio from the Central Station (Model
6
