Linear DUAL 824 manual Making a Sensor a 24-HOUR Door Chime, Press HOME, 8, then Away

MAKING A SENSOR A 24-HOUR DOOR CHIME

✦Sensors can be programmed to cause the keypad(s) to chime any time they're activated.

✦Chime-only sensors will not be able to trigger the alarm in any system mode.

✦The sensor must have already been programmed into the Control Panel (see “Adding Sensors to the System” for details).

1.Start with the system in Test Mode.

2.Enter the master user code then press TEST.

✴A “Gong” and fi ve “Beeps” will sound.

✴The sensor status indicators will light for each sensor programmed into the Control Panel.

3.Enter the sensor number from 01-24 (you must enter two digits, example: 5 = 05).

✴The sensor status indicator light will fl ash for the sensor number selected.

4.Press HOME, 8, then AWAY.

✴A “Bing” tone will sound and the sensor status indicator will light steady.

5.Enter another sensor number, or exit Setup Mode by pressing the key then press OFF for three seconds.

MAKING A SENSOR INTERIOR

✦Wireless motion detectors are automatically programmed as interior sensors. Any other sensor can also be programmed as an interior sensor.

✦Interior sensors can only trigger an alarm when the system is in the Away Mode.

✦“Home Interior” sensors can trigger an alarm when the Control Panel is in the Home or Away mode.

✦The sensor must have already been programmed into the Control Panel (see “Adding Sensors to the System” for details).

1.Start with the system in Test Mode.

2.Enter the master user code then press TEST.

✴A “Gong” and fi ve “Beeps” will sound.

✴The sensor status indicators will light for each sensor programmed into the Control Panel.

3.Enter the sensor number from 01-24 (you must enter two digits, example: 5 = 05).

✴The sensor status indicator light will fl ash for the sensor number selected.

4.Press HOME, 7, then AWAY.

✴A “Bing” tone will sound and the sensor status indicator will light steady.

5.Enter another sensor number, or exit Setup Mode by pressing the key then press OFF for three seconds.

START IN TEST

MASTER

USER

CODE

1 GONG & 5 BEEPS (SETUP MODE)

NUMBER OF

SENSOR

TO CHANGE

SENSOR

INDICATOR

FLASHES

ENTERS SENSOR

NUMBER

8 TO SELECT CHIME SENSOR FUNCTION

STORES CHANGE

1 BING AND SENSOR INDICATOR LIT

START IN TEST

MASTER

USER

CODE

1 GONG & 5 BEEPS (SETUP MODE)

NUMBER OF

SENSOR

TO CHANGE

SENSOR

INDICATOR

FLASHES

ENTERS SENSOR

NUMBER

7 TO SELECT INTERIOR SENSOR FUNCTION

STORES CHANGE

1 BING AND SENSOR INDICATOR LIT

27