Mitsubishi Electronics PUY-A24NHA2-BS Unit, Outdoor unit setting information, Cooling only

SW2 setting Display detail Explanation for display Unit

					The number of connected indoor units	0~3
ON						(The number of connected indoor units are dis-
						played.)	Unit
1	2	3	4	5	6

Capacity setting display Displayed as an outdoor capacity code

ON						Capacity	Code	Capacity	Code	Code
						A12N	9	A30N	14
										display
1	2	3	4	5	6	A18N	10	A36N	20
						A24N	11	A42N	25

						Outdoor unit setting information	• The tens digit (Total display for applied setting)
							Setting details	Display details
							H·P /Cooling only	0 : H·P	1 : Cooling only
							Single phase / 3 phase	0 : Single phase 2 : 3 phase
ON							• The ones digit			Code
										display
1	2	3	4	5	6		Setting details	Display details
							Defrosting switch	0 : Normal	1 : For high humidity
							(Example) When heat pump, 3 phase and
							defrosting (normal) are set up, “20” is
							displayed.
						Indoor pipe temperature / Liquid	– 38~190 (– 39~88:)
						(TH2(1))	(When the temperature is 0ºF or less, “–” and
ON
						Indoor 1	temperature are displayed by turns.)			˚F
						– 38~190
1	2	3	4	5	6
						Indoor pipe temperature / Cond. / Eva.	– 38~190 (– 39~88:)
						(TH5(1))	(When the temperature is 0˚F or less, “–” and
ON
						Indoor 1	temperature are displayed by turns.)
										˚F
						– 38~190
1	2	3	4	5	6
						Indoor pipe temperature / Liquid	– 38~190 (– 39~88:)
						(TH2(2))	(When the temperature is 0˚F or less, “–” and
ON
						Indoor 2	temperature are displayed by turns.)
										˚F
						– 38~190
1	2	3	4	5	6
						Indoor pipe temperature / Cond. / Eva.	– 38~190 (– 39~88:)
						(TH5(2))	(When the temperature is 0˚F or less, “–” and
ON
						Indoor 2	temperature are displayed by turns.)
										˚F
						– 38~190
1	2	3	4	5	6
						Indoor room temperature (TH1)	46~102 (8~39:)
						46~102
ON
										˚F
1	2	3	4	5	6

79