Motorola GT10 5.2.8GT Configuration Settings: “GT Internal Device Hold”, CAUTION, Device Setting dialog box, “GT internal device hold” screen

GT10/GT30 5.2 Entering Configuration Settings with GTWIN

that shown below, where the type of initial device, the address, and the number of words can be specified.

Device Setting dialog box

Click on the button to display the pull–down menu, and select the device from that menu. Enter the address using the ten–keys.

The button functions as a backspace key when entering addresses.

The button acts as a Clear key.

CAUTION

Data for PLC devices held in the GT10 will be written to the internal PLC device the next time that the power supply is turned on.

If the power supply on the GT10 side is not turned on, the data can be held for the period of time that the backup with the internal secondary battery is effective. For information on the internal secondary battery specifications, see “What the Internal Secondary Battery Does” on page 128.

5.2.8GT Configuration Settings: “GT Internal Device Hold”

Clicking on the “GT Internal Device Hold” tab in the “GT Configuration Settings” dialog box displays the screen shown below. “GT Internal Device Hold” is a function that holds the values for an internal device (GDT or GWR) in the GT main unit.

“GT internal device hold” screen

83