Motorola GT10 5.1GT10 Configuration Settings, 5.1.1Two Types of GT10 Configuration Settings, EXPLANATION, Items in the GT10 Configuration Settings

GT10/GT30 5.1 GT10 Configuration Settings

5.1GT10 Configuration Settings

Before using the GT10 for the first time, it must be set up by entering the GT10 configuration settings indicated below. Always check and enter the settings under “Basic communication area to PLC”. For instructions on setting up the GT10, see page 29.

5.1.1Two Types of GT10 Configuration Settings

1. Entering configuration settings from GTWIN screen creation tool . . page 73

With this method, GT10 configuration settings are entered from GTWIN screen creation tool, and the GT10 configuration file is sent to the GT10. Most items can be set using this method.

GT10 configuration file sent

GTWIN GT10

2. Entering configuration settings from the GT10 main unit . . . . . . . . . . page 85

Some of the settings, such as the communication parameters, the internal clock, and adjustments of the liquid crystal display contrast, can be set using the system menu of the GT10. Settings are entered using the touch switches on the front of the panel.

GT10

EXPLANATION

Items in the GT10 Configuration Settings

Items that can be set from GTWIN	Items that can be set	Items that can be set from the
	either way	GT10 system menu
Title setting	Communication parameters	Clock division setting for the internal
		clock
Type of PLC connected		LCD contrast setting
Basic communication area to PLC		Communication parameters
Communication parameters		Memory initialization
Auto–paging screen settings		Self–diagnosis
Startup screen (default screen) settings
Reference destination setting for clock
Backlight control
Touch sounds
Hold PLC device
GT internal device hold

72