Motorola GT10 Hold, Hold, Don’t hold, Don’t hold, Data register, Internal relay, GT internal device hold, GT internal device hold screen

GT10/GT30 6.2 Entering Configuration Settings with GTWIN

GT internal device hold screen

GT internal device hold

“GT Internal Device Hold” is a function that backs up the values for an internal device (GWR or GDT) in the GT main unit.

Data register

Don’t hold ––– The GT internal device hold function is turned off. Hold ––– The GT internal device hold function is turned on.

Internal relay

Don’t hold ––– The GT internal device hold function is turned off. Hold ––– The GT internal device hold function is turned on.

If the above setting for the GT internal device hold function is set to “Hold”, a “Start No.”

item is displayed. Click on the button to display the value setting dialog box shown below, and specify a starting number. After the setting has been entered, the contents of any addresses subsequent to the specified value will be held.

Value setting dialog box

Enter the starting number, using the ten–key pad.

The button functions as a backspace key when entering addresses.

The button acts as a Clear key.

106