GT10/GT30

6.2 Entering Configuration Settings with GTWIN

 

 

Device Setting dialog box

Click on the button to display the pull–down menu, and select the device from that menu. Enter the address using the ten–keys.

The button functions as a backspace key when entering addresses.

The button acts as a Clear key.

Transfer Outside

Clock data displayed in the GT30 can be transferred to an external device such as a PLC, using this setting.

Off ––– The GT30 clock data is not transferred to an external device.

On ––– The GT30 clock data is transferred to an external device.

If “On” is selected for the above “Transfer Outside” parameter, click on the button to specify the output destination and the initial device, and specify the address.

Data storage sequence for internal PLC device

 

Upper byte

Lower byte

 

 

 

Top address

Minutes data (H00 to H59)

Second data (H00 to H59)

 

 

 

Top address +1

Day data (H01 to H31)

Hour data (H00 to H23)

 

 

 

Top address +2

Year data (H00 to H99)

Month data (H01 to H12)

 

 

 

Top address +3

—

Day data (H00 to H06)

 

 

 

*In the day data, H00 indicates Sunday and H06 indicates Saturday.

CAUTION

If “On” is selected for the “Transfer Outside” parameter, the data will be transferred to the DT90054 as the default device. If this device address does not exist in the PLC connected to the GT30, however, re–specify the address so that it matches the model connected to the GT30.

Selecting a device address that does not exist in the PLC will cause an error (ER61) to occur.

Backlight control

Auto–Off

This is used to specify the Auto–Off backlight feature.

Off ––– The Auto–Off backlight feature is not used.

On ––– Auto–Off backlight feature is used. This parameter specifies the period of time that the GT30 is inactive before the backlight goes off automatically.

103