Motorola GT10 REFERENCE, Using the SYSMAC CS1 series (1 : 1), Setting the communication conditions, Setting the communication conditions for the GT main unit

GT10/GT30 4.12 Connecting with a PLC by Omron Corp.

Using the SYSMAC CS1 series (1 : 1)

CPU	Link I/F	Wiring diagram				GT series
CS1H–CPU67	RS232C port on	D–sub 9–pin on Omron PLC side		GT main unit side		GT10/GT30
CS1H–CPU66	CPU unit	Pin no.	Abbreviation	Pin no.	Abbreviation
CS1H–CPU65		1	FG	SD	SD
CS1H–CPU64		2	SD	RD	RD
CS1H–CPU63		3	RD	RS	RS
CS1G–CPU45		4	RS	CS	CS
CS1G–CPU44		5	CS	GND	GND
CS1G–CPU43		6
CS1G–CPU42		7
		8
		9	SG
	Peripheral port on	Connection cable for the
	CPU unit *1	peripheral port (25–pin)		GT main unit side
		Pin no.	Abbreviation	Pin no.	Abbreviation
		1	FG	SD	SD
		2	RD	RD	RD
		3	SD	RS	RS
		4	CS	CS	CS
		5	RS	GND	GND
		6
		7	SG
		.
		.
		25
	CS1W–SCU21	D–sub 9–pin on Omron PLC side		GT main unit side
		Pin no.	Abbreviation	Pin no.	Abbreviation
		1	FG	SD	SD
	CS1W–SCB21	2	SD	RD	RD
		3	RD	RS	RS
		4	RS	CS	CS
		5	CS	GND	GND
	CS1W–SCB41	6
		7
		8
		9	SG

*1 The CS1W–CN225 or CS1W–CN625 cable is required in order to connect a peripheral board.

REFERENCE

For the contents of error codes, please refer to “Error Codes and How to Handle Them” on page 142.

Setting the communication conditions

Setting the communication conditions for the GT main unit

The following settings should be entered for the COM port communication condition settings.

Item	Value Set
Communication speed setting	19200 bits/s
Data length	7 bits
Parity check	Yes, Even
Stop bits	1 bit

68