Motorola GT10 NOTES, Setup” under “GT10 Configuration Settings” on page, For information on the displayed dialog box, please see “Basic

GT10/GT30 3.2 Setting the Basic Communication Area, GT10 and PLC

sub–menu. Turn on the radio button for “IOP01 Mode” in the displayed dialog box.For information on the displayed dialog box, please see “BasicSetup” under “GT10 Configuration Settings” on page 73.

Map of the basic communication area for conventional models (conventional name: system area)

If the IOP01 mode is set, the basic communication area map for the GT10 is as follows.

Reference data area

Address

Bit configuration

F

E

D

C

B

A

9

8

7

6

5

4

3

2

1

0

n

BZ

PC

Screen no.

n+1

n+2

Tag bit field

* Note 1

n+3

(Used to turn tag display on/off, display status screen segments, and display settings)

•

•

•Tag field * Note 1

(Used to switch tags, specify movements, and reference and set data)

•

System field (fixed at 2 words)

Field for user use (fixed at

126words maximum)

Output destination relay

Address

Bit configuration

F

E

D

C

B

A

9

8

7

6

5

4

3

2

1

0

System switch out-

Function switch out-

n

put destination

put destination

Displayed screen data (no. of screen

Not supported

Not supported

currently displayed)

* Note 2

* Note 2

n+1

BAT

SET

n+2

n+3

Output destination relay * Note 1

•(Used for switch output destinations of tags, segments, and manual switches)

•

System field (fixed at 2 words)

Field for user use (fixed at 30 words max- imum)

NOTES

1)The tag bit field and tag field under “Reference data area”, and the output destination relay field under “Output relay” can be switched just as they are, as device setting destinations for GT10 parts functions.

2)System switch output destinations and function switch output destinations provided in conventional models as the initial addresses under “Output relay” are not supported with the GT10.

32