Motorola GT10 4.2.2Connecting to the TOOL Port

GT10/GT30 4.2 Connecting the FP0

customer. When purchasing a cable, the following precautions should be observed:

Shielded wire with a size of AGW#28 to 16 (conductor cross–section surface area: 0.08 mm2 to 1.25 mm2) should be used for connections.

For wiring procedures, please refer to “Wiring the COM. Port” on page 23.

4.2.2Connecting to the TOOL Port

GT10

GT30

FP0 TOOL port

AIGT8192

FP0 communication format settings

System register no.	Item	Value Set	System register
			value
410	Unit number	1	K1
411	Data length	8 bits	H0
	Modem connection	No connection
				←To set 19200 bits/s for both
414	Baud rate setting	19200 bits/s	H010X
				the COM. port and the TOOL
			X is 0 to 6
				port, “H0100” should be set.

PLC communication cable: Mini–DIN 5–pin loose–wire cable (AIGT8192)

	2000mm	Mini–DIN plug side signals
	35mm	Pin no.	Abbrev.	Wire Color
	5mm	1	SG	Brown
		2	SD	White or red
4	5
		3	RD	Green or orange
2	3
		4		
1
		5		
	Wires’ cross section: 0.25mm2
		Specifications	L	Product No.
		Mini–DIN 5–pin
		Single–side	2m	AIGT8192
		loose wire

46