GT10/GT30

6.2 Entering Configuration Settings with GTWIN

 

 

Device settings dialog box

Clicking on the button displays a pull–down menu. Select the device for which settings are to be entered, and use the ten–keys to enter addresses.

The button functions as a backspace key when entering addresses.

The button acts as a Clear key.

REFERENCE

For detailed information on the basic communication area map, see “GT30 Basic Communication Area Map” on page 38.

EXPLANATION

Standard settings

Clicking on the button in the “GT Configuration” dialog box

displays the following message. Clicking on [OK] sets the default values (the configuration settings entered when the unit is shipped) for all of the settings.

For information on the contents of configuration settings entered when the unit is

shipped, see “Contents of configuration settings for GT30 when shipped from the factory” on page LEERER MERKER.

6.2.3GT Configuration Settings: “Communication Parameters”

Clicking on the “Communication Parameters” tab in the “GT Configuration” dialog box displays the following screen.

This is where communication parameters for the PLC and personal computer (GTWIN) connected to the GT30 are set.

97