Motorola GT10 10.2 Booting GTWIN, 10.2.1Selecting the Working Menu, 10.2.2Selecting the Model

GT10/GT30 10.2 Booting GTWIN

10.2 Booting GTWIN

Click on the Windows button and then select “Program”, “NAiS Terminal”, and “GTWIN” on the displayed Windows menu, in that order.

10.2.1Selecting the Working Menu

When GTWIN is booted, a startup menu like that shown below is displayed on the screen. Turn on one of the three radio buttons and click on [OK].

Create New File

Select this to create new screen data.

Open Existing File

Select this to read and edit screen data saved to a disk.

An Open File dialog box is displayed on the screen. Select a file to edit.

Read From GT

Select this to read and edit screen data saved to the GT10.

10.2.2Selecting the Model

If “Create New File” or “Read From GT” is selected from the startup menu, a dialog box like that shown below is displayed, where the model can be selected. Click on the pull–down list button [ ] to the right of the display window, and select the model of PLC

or GT being used. Then click on [OK].

PLC Model

– Matsushita MEWNET–FP Series

Select this if the GT10 is connected to the MEWNET–FP Series.

– General–Purpose serial

Select this if the GT10 is connected to a general–purpose RS232C device such as a personal computer or microcomputer board.

– Mitsubishi FX series

Select this when connecting to the FX series of PLCs made by Mitsubishi Electric.

– Omron C series

Select this when connecting to the C series of PLCs made by Omron Corporation.

GT Model

–GT10 monochrome

–GT10 (vertical) monochrome

–GT30 Monochrome

–GT30 color

158