The next screen shows a summary of your settings. If they are
correct, press 
to continue.
Use 
and 
to select each digit of the “default” area code.
Press 
to enter each choice, then press to confirm the area code. The clipOn will use this area code when you select a phone number to dial that includes seven digist only (does not include an area code). Enter your local area code unless you make most of your calls to a different area code. For information about placing calls with the clipOn, see “Calling with the StarTAC clipOn” on page 9.
Now press 
, and you are ready to start using the StarTAC clipOn.
Using the clipOn Home screen and views
When you have completed the Setup Wizard, you will see the Home screen:
Calendar | Contacts | To Do |
To enter a view, such as the Calendar, use 
or 
to highlight its icon,
then press 
.
Memos | Time Zones Preferences |
Using the Home screen:
Press or hold 
until the Home screen appears. From the Home screen, use:
and 
to highlight the icons.
ã
to enter a module.
to check the owner information.
Getting started
7
