NEC 320Lc, 320Lc-R, N8800-063E/064E TCP/IP Setting, SNMP Service Setting, Operation Environment, Preparation before Setup, To install the SNMP Service:

Procedures after Completion of Installation 5-3Operation Environment

NEC ESMPRO Agent can be operated in the hardware and software environments shown below.

Hardware

•	Installation system		NEC Express5800/ft series
•	Memory		Memory capacity required to operate OS +
			25.0 MB or larger
•	Empty capacity of hard		50.0 MB or larger
	disk
Software		Windows Server 2003, Windows 2000

Preparation before Setup

Be sure to read the following description before system installation or setup.

To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of components associated with TCP/IP.

TCP/IP Setting

See the Help started from the Start menu for how to set TCP/IP.

SNMP Service SettingTo install the SNMP Service:

1.Open [Add/Remove Programs] in [Control Panel].

2.Click [Add/Remove Windows Components].

3.Select [Management and Monitoring Tools] in the Windows component wizard and click the [Details...] button.

4.Check the check box of [Simple Network Management Protocol].

5.Click the [Next] button.

The file copy operation is started.

6.After the file copy is finished, click the [Finish] button.

To change the settings of the SNMP Service:

1.Double-click [Administrative Tool] in [Control Panel].

2.Start [Services] in [Administrative Tool].

3.Select [SNMP Service] from the service list and then [Properties] in the [Action] menu. The "SNMP Properties" dialog box appears.