Windows Setup 4-39

Registering RDR key

When using the RDR function for the first time, follow the steps below to register the key:

1.Insert “RDR Key FD” that came with the server into the floppy disk drive.

2.From [Start], select [All Programs] – [Accessories] – [Windows Explorer] to start Windows Explorer, and then double-click “RDRreg.bat” in FD.

3.The message “RDR registration has completed.” appears on the command prompt, and the RDR function becomes available.

4.Press any key on the command prompt to close the window.

Setting dual disk configuration

1.From [Start], select [All Programs] then [RDR] and click [RDR Utility] to start “RDR Utility.”

2.From the tree on the left on the “RDR Utility”, right-click a disk where the system is installed (Slot1 of PCI module (Group1)) and click [Add RDR Virtual Disk].

TIPS:

In “RDR Utility”, names of PCI modules correspond as below: PCI module (Group1) - PCI module 1

PCI module (Group2) - PCI module 2

Depending on the disk type, RDR setting may take longer time and the “RDR Utility” may appear to freeze for several minutes, however it is not an error. Wait until the process ends.