4-38 Windows Setup
Setting Dual Disk Configuration by the RDR (Rapid Disk Resync) function
On a model supporting the RDR function, dual disk configuration is set for each pair of disks by the RDR function of the ft control software. By setting RDR, duplication is configured with disks in the corresponding slots as shown below, and each pair of disks is recognized as one virtual disk from Windows (the disk manager or the device manager, etc.).
| Slot1 | Slot2 | Slot3 |
|
| ||||
|
|
|
|
|
Group1
Group2
Corresponding slots for mirroring process
Corresponding slots | Virtual disk names in RDR |
| Utility |
|
|
PCI module (Group1) Slot1 ⇔ PCI module (Group2) Slot1 | RDR Virtual Disk 1 |
PCI module (Group1) Slot2 ⇔ PCI module (Group2) Slot2 | RDR Virtual Disk 2 |
PCI module (Group1) Slot3 ⇔ PCI module (Group2) Slot3 | RDR Virtual Disk 3 |
IMPORTANT:
To perform this procedure, you need to log on as “Administrator” or a member of the group “Administrators”.
RDR can be set only to the
For RDR setting, use disks whose entire capacities are the same.
Make sure to set RDR not only when installing OS but also when adding disks to the PCI modules.