Troubleshooting 6-3

If you have a computer that runs Windows Server 2003, Windows 2000/XP/NT or Windows 95/98/Me.

You can also create a “Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER” by the steps below:

1.Prepare a 3.5-inch floppy disk.

2.Insert the NEC EXPRESSBUILDER CD-ROM into the drive of a computer that runs Windows Server 2003, Windows 2000/XP/NT or Windows 95/98/Me.

3.From [Setup], select [Make OEM-Disk].

4.Follow the instructions on the screen to insert the floppy disk.

“Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER” will be created on the floppy disk. Write-protect and place a label on the disk and keep it in a safe place.

If you have an update CD-ROM “NEC Express5800/ft series ft Update CD (Ver:n.n).”

Follow the steps below to create a “Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER”:

1.Prepare a 3.5-inch floppy disk.

2.Insert the update CD-ROM into the drive of a computer that runs Windows Server 2003, Windows 2000/XP/NT or Windows 95/98/Me.

3.From the Start menu, select [Run...] to run \WINNT\BIN\MAKEFD\DOTNET\MAKEOEM.BAT LANGENG on the CD-ROM.

IMPORTANT: LANGENG is an argument. Be sure to specify it.

4.Follow the instructions on the screen to insert the floppy disk.

“Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER” will be created on the floppy disk. Write-protect and place a label on the disk and keep it in a safe place.